738-52 MIFARE® USB MODULE

The 738-52 Proximity Card Reader Module is specially designed for the operation in a PC environment. It is suitable for reading the UID-Code from MIFARE® passive transponders. Their internal code can be used directly in whatever software application without any need for software modification, since it is entered at the Curser Position. Like this typing errors can be avoided and the card number does not need to be printed on the outside anymore.

The 738-52 has got a keyboard emulation and can be plugged in directly into a USB Port without installation of any hardware drivers. It acts as a Human Interface Device (HID). No external power supply required.

Attributes

  • Easy connection by Standard USB port
  • Control of reading process by buzzer tone
  • USB-Interface transmitting either the Hex- or the Decimal-Code in user selectable length.
  • Contactless reading of the MIFARE ® UID-Code. (Ultralight, Desfire, Standard, Mifare plus ®)
  • Reads common NFC Tags
  • Reverse UID order selectable
  • Custom formats possible
  • Up to 20 output formats adjustable

Application ranges

  • POS Systems
  • PC User Authorisation
  • Verification of passive transponder card number also without imprint
  • Security & Access Control Systems

Technical specifications

BuzzerYes
Dimensions (LxBxH) mm83 x 43 x 17
Frequency13,56 MHz
Humidity5 – 95%
InterfaceStandard USB Interface
LED2
LED ControlCable
Operating Temperature Range0°C to +50°C
Operating VoltagePower supplied through USB interface, no external source required
Reading DistanceApprox. 8cm depending on transponder type chosen.
RFID Transponders SupportedCompatible with MIFARE® Classic, MIFARE Ultralight® and MIFARE DESFire®,
NTAG 2XX
Special FeaturesEasy connection by Standard USB-Port Plug as Human Interface Device(HID)
Storage Temperature Range0°C to +50°C
Transponder ID Code10-digit in HEX or 13-digit in Decimal code
Weight (in g)185

Download following datasheets

738-52-USB-NEW-Mifare-Desktop-Reader-Rev-5-0-Datasheet